| 配件信息 |
| FC号 | PN号 | 品牌 | 描述 |
| 磁带 |
| 199704-001 | HP | DLT cleaning cartridge - Not for DLT 1 or DLT VS |
| 217861-B21 | HP | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 21 tapes |
| 217862-B22 | HP | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 315 tapes |
| 295192-B21 | HP | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of seven tapes |
| 295194-B21 | HP | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| C5141-60010 | HP | DLT type IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| C5141-85700 | HP | DLTtape IIIXT tape cartridge - 15GB native capacity - (C5141A) |
| C5141A | HP | DLTtape IIIXT tape cartridge - 15GB native capacity RoHS: Modified |
| C5141FL | HP | DLTtape IV pre-labeled tape cartridges - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code labels - Package of 20 pre-labeled tapes |
| C5141L | HP | DLTtape IV pre-labeled tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code label |
| C5142-60010 | HP | DLT cleaning cartridge - Not for DLT 1 or DLT VS - |
| 磁带驱动器 |
| A4853-69006 | HP | DLT 4000 tape drive assembly - Includes drive, enclosure, and cooling fan - (A4860A) |
| A4853-69108 | HP | DLT 7000 tape drive assembly - Includes drive, enclosure, and cooling fan - (A4861A) |
| 其它 |
| 413292-001 | HP | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long - |
| 413293-001 | HP | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 128 ohms - 5.0m (16ft) long - |
| 413296-001 | HP | SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M) - 90 ohms - 2.5m (8.2ft) long - |
| 413297-001 | HP | SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M) - 90 ohms - 5.0m (16ft) long - |
| 413298-001 | HP | SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M) - 90 ohms - 10.0m (33ft) long - |
| 5012-8337 | HP | SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M), 90 ohms, 1.0m (3.3ft) long - |
| 5012-8342 | HP | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 10.0m (33ft) long - |
| 5183-2682 | HP | SCSI interface cable with thumbscrews on both ends - Has 68-pin high density (M) connectors - 20.0m (65.6ft) long - (C7532A) |
| A3639-63011 | HP | SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 1.0m (3.3ft) long - (A3401A Option 806, A4852A Option 806, A4854A Option 806) |
| A3639-63012 | HP | SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 2.5m (8.2ft) long - (A3401A Option 807, A4852A Option 807, A4854A Option 807) |
| A3639-63013 | HP | SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 5.0m (16ft) long - (A3401A Option 808, A4852A Option 808, A4854A Option 808) |
| A3639-63014 | HP | SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 10.0m (33ft) long - (A3401A Option 809, A4852A Option 809, A4854A Option 809) |
| A4801-63002 | HP | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) with inline termination - 10.0m (33ft) long - (A3401A Option 851, C7555A) |
| A4801-63004 | HP | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) with inline termination - 5.0m (16ft) long - (A3401A Option 875, C7554A) |
| A4845-67021 | HP | Cable kit - Includes two DB-9 (F) to RJ-45 (F) connectors and a cable with RJ-45 (M) connectors on both ends - 3.0m (9.8ft) long - PC to Library Adaptor |
| A4845-67023 | HP | DLT SCSI 68-50 pin jumper for DLT 4000 cable assembly - Has 68 pin high density (F) external connectors on each end and a 50 pin (F) internal connector in the middle of the cable - 0.4m (1.4ft) long |
| A4845-67025 | HP | DLT 7000 SCSI ID cable |
| A4845-67201 | HP | Power supply, +5VDC and +12VDC output, 50 watts - For the DLT 4000, DLT 7000 and DLT 8000 drives - Mounts inside the back of the drive enclosure |
| A4853-67001 | HP | Tubeaxial fan - Mounts inside the DLT drive enclosure |
| A4853-67003 | HP | Flex cable assembly - From vertical transport (Z column) to tape cartridge picker (hand) |
| A4853-67005 | HP | Power supply for the rear panel fan assembly - Supplies +24VDC at 3.5A, 85 watts |
| A4853-67012 | HP | A4853A microcode floppy - Version HP1.1.02 |
| A4853-67013 | HP | Key for front bezel (front door) |
| A4853-69009 | HP | System library controller board and SCSI interface |
| A4853-69010 | HP | Tape cartridge picker (hand) assembly including motor - Cartridge holding mechanism - Transports cartridges between the storage slots and the DLT drives |
| A4853-90000 | HP | A4853A DLT library hardware operator's guide |
| A4853-90002 | HP | A4853A DLT library service manual |
| A4853-90003 | HP | A4853A DLT library installation guide |
| A4853-90004 | HP | A4853A DLT library system assurance guide |
| C2361A | HP | SCSI interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 90 Ohms - 1.0m (3.3ft) long |
| C2362A | HP | Low voltage differential SCSI (LVDS) interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 90 Ohms - 2.5m (8.2ft) long |
| C2363A | HP | SCSI interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 90 Ohms - 10.0m (33ft) long |
| C2365A | HP | SCSI interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 90 Ohms - 5.0m (16ft) long |
| C7554A | HP | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - Includes inline terminator for use with HP V-Class computers - 5.0m (16ft) long |
| C7555A | HP | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - Includes inline terminator for use with HP V-Class computers - 10.0m (33ft) long |
| Q2004A | HP | DLTtape IV bar code labels - Package of 100 data cartridge labels and 10 cleaning labels |
| STK-10075150 | HP | Push mount cable tie-wrap |
| STK-10148003 | HP | Wide Differential low profile SCSI terminator - Has 68-pin high density (M) connector with thumbscrews - Located inside the DLT drive enclosure |
| STK-3000404XX | HP | Power supply for the system library board - Supplies +5VDC and -5VDC, 40 watts |
| STK-3000406XX | HP | Control (operator) panel and display assembly - Does not include cable |
| STK-3000415XX | HP | DC motor (Z and Theta) - Used in the vertical drive assembly (Z column assembly), tape cartridge picker (hand) assembly and in the main chassis (three used) |
| STK-300044901 | HP | Front bezel/door assembly - Includes the front bezel and lock mechanism |
| STK-309172301 | HP | DLT leader repair kit for DLT 4000, DLT 7000, and DLT 8000 - Only trained CEs should use this kit |
| STK-3102979XX | HP | Proximity switch cable assembly |
| STK-3102998XX | HP | Cable assembly - DLT DC power cable - Located in the drive enclosure |
| STK-313109201 | HP | Cable assembly - Control (operator) panel ribbon cable assembly - Attaches to the edge connector in front of chassis |
| STK-313111501 | HP | Cable assembly - Motor interface cable assembly - Located inside the main chassis |
| STK-313112004 | HP | Empty drive tray assembly - Holds tape drive and other components |
| STK-3131130XX | HP | Cable assembly - Tape transport cable assembly - Located inside the main chassis towards the front |
| STK-313113101 | HP | SCSI ribbon cable - Has an internal 68-pin (M) connector marked `J3`, an external 68-pin (F) connector marked `J1`, and an external 68-pin (F) connector marked `J2` - 71.1cm (16.2in) long - From DLT 7000 rear panel to system library controller board |
| STK-3131146XX | HP | CAP (Cartridge access port) door assembly - Cartridges are inserted and removed through this door |
| STK-313115901 | HP | Cable assembly - DLT 4000 SCSI ID cable - Located inside the drive enclosure |
| STK-3131340XX | HP | Vertical transport (Z column) belt - Cut length - Moves the tape cartridge picker (Hand) assembly up and down |
京公网安备 11010802036102号