配件信息 |
FC号 | PN号 | 品牌 | 描述 |
磁带 |
|
199704-001
|
HP
|
DLT cleaning cartridge - Not for DLT 1 or DLT VS
|
|
217862-B22
|
HP
|
DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 315 tapes
|
|
295192-B21
|
HP
|
DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of seven tapes
|
|
295194-B21
|
HP
|
DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives
|
|
A5597-67016
|
HP
|
Cartridge access port (CAP) open/closed sensor assembly - Includes a micro switch marked OPEN, a micro switch marked CLOSED, a connector marked CAP, and the attached cable assembly - One sensor assembly used for each CAP
|
|
A5597-67017
|
HP
|
Five cell tape cartridge magazine - Used in cartridge access port (CAP) - Up to eight magazines are used
|
|
A5597-67029
|
HP
|
9840 drive cleaning cartridge
|
|
A5597-67032
|
HP
|
Six cell tape cartridge magazine - Up to 115 magazines are used
|
|
C5141-60010
|
HP
|
DLT type IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives
|
|
C5141-85700
|
HP
|
DLTtape IIIXT tape cartridge - 15GB native capacity - (C5141A)
|
|
C5141A
|
HP
|
DLTtape IIIXT tape cartridge - 15GB native capacity RoHS: Modified
|
|
C5141FL
|
HP
|
DLTtape IV pre-labeled tape cartridges - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code labels - Package of 20 pre-labeled tapes
|
|
C5141L
|
HP
|
DLTtape IV pre-labeled tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code label
|
|
C5142-60010
|
HP
|
DLT cleaning cartridge - Not for DLT 1 or DLT VS -
|
|
C7970B
|
HP
|
Linear Tape Open (LTO) Ultrium-1 bar code labels - Package of 100 data cartridge labels
|
|
C7971-60010/305421-001
|
HP
|
Replaced: 305421-001 Linear Tape Open (LTO) Ultrium-1 tape cartridge (Blue color) - 319m (1047ft), 100GB native capacity (200GB with 2:1 data compression) - (Option C7971A)
|
|
C7971A
|
HP
|
HP LTO Ultrium 230 (200GB) Data Cartridge
|
|
C7971AL
|
HP
|
Linear Tape Open (LTO) Ultrium-1 609m (1998ft) pre-labeled tape cartridges (Blue color) - 100GB native capacity (200GB with 2:1 data compression) - Includes bar code labels - Package of 20 pre-labeled tapes
|
|
C7971AR
|
HP
|
Linear Tape Open (LTO) Ultrium-1 609m (1998ft) tape cartridge (Blue color) - 100GB native capacity (200GB with 2:1 data compression)
|
|
C7971L
|
HP
|
Linear Tape Open (LTO) Ultrium-1 609m (1998ft) pre-labeled tape cartridge (Blue color) - 100GB native capacity (200GB with 2:1 data compression) - Includes bar code label
|
|
C7978-60010/305422-001
|
HP
|
Replaced: 305422-001 Universal Cleaning Cartridge (Orange color) - For Linear Tape Open (LTO) Ultrium - NOTE: for HP Ultrium drives that shipped after January 2002 and for older drives with a firmware upgrade (Option C7978A)
|
|
C7978A
|
HP
|
Universal Cleaning Cartridge (Orange color) - For Linear Tape Open (LTO) Ultrium - For use with HP Ultrium drives that shipped after January 2002 and for older drives with a firmware upgrade
|
|
C7978AR
|
HP
|
Universal Cleaning Cartridge (Orange color) - For Linear Tape Open (LTO) Ultrium - NOTE: for HP Ultrium drives that shipped after January 2002 and for older drives with a firmware upgrade
|
|
C7979A
|
HP
|
Legacy Cleaning Cartridge - For Linear Tape Open (LTO) Ultrium
|
磁带驱动器 |
|
A5598A
|
HP
|
9840 High Voltage Differential SCSI (HVDS) drive kit - Includes 9840 drive, power supply, SCSI terminator, and required cables - Occuplies one and one-half drive slots
|
|
A5598AR
|
HP
|
9840 High Voltage Differential SCSI (HVDS) drive kit - Includes 9840 drive, power supply, SCSI terminator, and required cables - Occuplies one and one-half drive slots
|
|
A5599-69201
|
HP
|
DLT 8000 tape drive mechanism kit - Includes drive, screws, jumpers, hard copy documentation, and documentation in the form of software on a CD-ROM - (A5599A)
|
|
A5599A
|
HP
|
DLT 8000 High Voltage Differential SCSI (HVDS) drive kit - Includes DLT 8000 drive, power supply, SCSI terminator, and required cables
|
|
A5599AR
|
HP
|
DLT 8000 High Voltage Differential SCSI (HVDS) drive kit - Includes DLT 8000 drive, power supply, SCSI terminator, and required cables
|
|
A5606-69001
|
HP
|
20GB HP9840 tape drive mechanism - (A5598A, A5606A)
|
|
A5618-69101
|
HP
|
DLT 7000 tape drive mechanism kit - Includes drive, screws, jumpers, hard copy documentation, and documentation CD-ROM - (A5618A)
|
|
A5618A
|
HP
|
DLT 7000 High Voltage Differential SCSI (HVDS) drive kit - Includes DLT 7000 drive, power supply, SCSI terminator, and required cables
|
|
A6322-69001
|
HP
|
Ultrium 230 LTO tape drive with Low Voltage Differential SCSI (LVDS) interface - Does not include power supply, SCSI terminator, or cables - (part of A6322A)
|
|
A6322A
|
HP
|
Ultrium 230 LTO tape drive with Low Voltage Differential SCSI (LVDS) interface - Requires LVDS interface or LVDS bridge - Includes drive, power supply, SCSI terminator, and required cables
|
|
A6322AR
|
HP
|
Ultrium 230 LTO tape drive with Low Voltage Differential SCSI (LVDS) interface - Requires LVDS interface or LVDS bridge - Includes drive, power supply, SCSI terminator, and required cables
|
|
A6323-69001
|
HP
|
Ultrium 230 LTO tape drive with High Voltage Differential SCSI (HVDS) interface - Does not include power supply, SCSI terminator, or cables - (part of A6323A)
|
|
A6323A
|
HP
|
Ultrium 230 LTO tape drive with High Voltage Differential SCSI (HVDS) interface - Includes drive, power supply, SCSI terminator, and required cables
|
|
A6323AR
|
HP
|
Ultrium 230 LTO tape drive with High Voltage Differential SCSI (HVDS) interface - Includes drive, power supply, SCSI terminator, and required cables
|
其它 |
|
353888-001/5183-2672
|
HP
|
Replaced: 5183-2672 SPS-CA 2M DIFF SCSI TCT SPS-CA 2M DIFF SCSI TCT
|
|
413290-001
|
HP
|
SCSI interface cable with thumbscrews on ends - 68 pin high density (M) to 68 pin high density (M) - 0.5m (1.6ft) long
|
|
413291-001
|
HP
|
Low Voltage Differential SCSI (LVDS) interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M), 90 ohms , 1.0m (3.3ft) long -
|
|
413292-001
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long -
|
|
413293-001
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 128 ohms - 5.0m (16ft) long -
|
|
413296-001
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M) - 90 ohms - 2.5m (8.2ft) long -
|
|
413297-001
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M) - 90 ohms - 5.0m (16ft) long -
|
|
413298-001
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M) - 90 ohms - 10.0m (33ft) long -
|
|
413301-001
|
HP
|
Active Wide Single-Ended SCSI terminator - With 68-pin high density (M) connector with thumbscrews -
|
|
413302-001
|
HP
|
VHDCI Low Voltage Differential (LVD)/Single-ended (SE) terminator -VHDCI Low Voltage Differential (LVD)/Single-ended (SE) terminator
|
|
5012-8332
|
HP
|
SCSI interface cable with thumbscrews on both ends - 50-pin high density (M) to 68-pin high density (M) - 2.0m (6.6ft) long -
|
|
5012-8337
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M), 90 ohms, 1.0m (3.3ft) long -
|
|
5012-8342
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 10.0m (33ft) long -
|
|
5181-7705
|
HP
|
SCSI interface cable with thumbscrews on both ends - 50-pin high density (M) to 68-pin high density (M) - 1.0m (3.3ft) long - (C2961A)
|
|
5181-7708
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 50-pin high density (M) - 5.0m (16ft) long - (C2907A)
|
|
5183-2682
|
HP
|
SCSI interface cable with thumbscrews on both ends - Has 68-pin high density (M) connectors - 20.0m (65.6ft) long - (C7532A)
|
|
8120-6514
|
HP
|
Daisy chain power cord (Jade Gray) - 18 AWG, 2.0m (6.6ft) long - Has (M) C14 plug for power input, and (F) C13 plug for power output
|
|
A1376A
|
HP
|
Expansion kit - Adds 56 cartridge slots to a library that currently has 84 slots to provide a total of 140 cartridge slots
|
|
A1376AR
|
HP
|
Expansion kit - Adds 56 cartridge slots to a library that currently has 84 slots to provide a total of 140 cartridge slots
|
|
A1377A
|
HP
|
Expansion kit - Adds 34 cartridge slots to a library that currently has 140 slots to provide a total of 174 cartridge slots
|
|
A1377AR
|
HP
|
Expansion kit - Adds 34 cartridge slots to a library that currently has 140 slots to provide a total of 174 cartridge slots
|
|
A1658-62024
|
HP
|
High Voltage Differential/Fast Wide Differential SCSI terminator - 68-pin high density (M) connector with thumbscrews -
|
|
A3308A
|
HP
|
FC to SCSI Bridge/Multiplexer - Used to connect 1 or 2 computers using Fiber Channel (FC) interfaces with up to four High Voltage Differential SCSI (HVDS) drives
|
|
A3308AR
|
HP
|
FC to SCSI Bridge/Multiplexer - Used to connect 1 or 2 computers using Fiber Channel (FC) interfaces with up to four High Voltage Differential SCSI (HVDS) drives
|
|
A3511A
|
HP
|
FC to SCSI Bridge/Multiplexer - Used to connect 1 or 2 computers using Fiber Channel (FC) interfaces with up to four High Voltage Differential SCSI (HVDS) drives
|
|
A3511AR
|
HP
|
FC to SCSI Bridge/Multiplexer - Used to connect 1 or 2 computers using Fiber Channel (FC) interfaces with up to four High Voltage Differential SCSI (HVDS) drives
|
|
A3511AZ
|
HP
|
FC to SCSI Bridge/Multiplexer - Used to connect 1 or 2 computers using Fiber Channel (FC) interfaces with up to four High Voltage Differential SCSI (HVDS) drives
|
|
A3511AZR
|
HP
|
FC to SCSI Bridge/Multiplexer - Used to connect 1 or 2 computers using Fiber Channel (FC) interfaces with up to four High Voltage Differential SCSI (HVDS) drives
|
|
A3639-63011
|
HP
|
SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 1.0m (3.3ft) long - (A3401A Option 806, A4852A Option 806, A4854A Option 806)
|
|
A3639-63012
|
HP
|
SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 2.5m (8.2ft) long - (A3401A Option 807, A4852A Option 807, A4854A Option 807)
|
|
A3639-63013
|
HP
|
SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 5.0m (16ft) long - (A3401A Option 808, A4852A Option 808, A4854A Option 808)
|
|
A3639-63014
|
HP
|
SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 10.0m (33ft) long - (A3401A Option 809, A4852A Option 809, A4854A Option 809)
|
|
A4673A
|
HP
|
Ultrium (LTO) and SDLT high voltage differential SCSI (HVDS) to fiber channel conversion kit - Includes one fiber channel interface card, optical GBIC, and 16m optical cable - One kit is required for every two HVDS drives
|
|
A4673AR
|
HP
|
Ultrium (LTO) and SDLT high voltage differential SCSI (HVDS) to fiber channel conversion kit - Includes one fiber channel interface card, optical GBIC, and 16m optical cable - One kit is required for every two HVDS drives
|
|
A4674A
|
HP
|
Ultrium (LTO) and SDLT low voltage differential SCSI (LVDS) to fiber channel conversion kit - Includes one fiber channel interface card, optical GBIC, and 16m optical cable - One kit is required for every two LVDS drives
|
|
A4674AR
|
HP
|
Ultrium (LTO) and SDLT low voltage differential SCSI (LVDS) to fiber channel conversion kit - Includes one fiber channel interface card, optical GBIC, and 16m optical cable - One kit is required for every two LVDS drives
|
|
A4688A
|
HP
|
SureStore E bridge FC 4/1 HV - Connects a fiber channel input to four High Voltage Differential SCSI outputs - Includes bridge, fiber-optic cable, Gigabit interface converter (GBIC), serial cable, RJ-45 LAN cable, rack mount
|
|
A4688AR
|
HP
|
SureStore E bridge FC 4/1 HV - Connects a fiber channel input to four High Voltage Differential SCSI outputs - Includes bridge, fiber-optic cable, Gigabit interface converter (GBIC), serial cable, RJ-45 LAN cable, rack mount
|
|
A4689A
|
HP
|
SureStore E bridge FC 2/1 LV - Connects a fiber channel input to two Low Voltage Differential SCSI outputs - Includes bridge, fiber-optic cable, Gigabit interface converter (GBIC), serial cable, RJ-45 LAN cable, rack mount
|
|
A4689AR
|
HP
|
SureStore E bridge FC 2/1 LV - Connects a fiber channel input to two Low Voltage Differential SCSI outputs - Includes bridge, fiber-optic cable, Gigabit interface converter (GBIC), serial cable, RJ-45 LAN cable, rack mount
|
|
A4801-63002
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) with inline termination - 10.0m (33ft) long - (A3401A Option 851, C7555A)
|
|
A4801-63004
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) with inline termination - 5.0m (16ft) long - (A3401A Option 875, C7554A)
|
|
A4845-67201
|
HP
|
Power supply, +5VDC and +12VDC output, 50 watts - For the DLT 4000, DLT 7000 and DLT 8000 drives - Mounts inside the back of the drive enclosure
|
|
A4853-67001
|
HP
|
Tubeaxial fan - Mounts inside the DLT drive enclosure
|
|
A5296A
|
HP
|
Low Voltage Differential (LVD)/Eingle-ended (SE) SCSI terminator - Has 68 pin very high density connector with thumbscrews
|
|
A5597-67003
|
HP
|
DC motor - Includes motor, pulley, power cable, data cable, and connectors marked P663, P664, P670, P671 - For Z or Theta - Used in the vertical transport assembly (Z column assembly) - Two used
|
|
A5597-67004
|
HP
|
Electronic module fan assembly - Includes two tubeaxial fans on an `L` shaped bracket with the connector assembly - Mounts between the DC power supplies and the MPC card
|
|
A5597-67005
|
HP
|
Motor for cartridge access port (CAP) - Includes motor, mounting bracket, pulley, cable, and plug - One used for each CAP assembly - One or two CAP assemblies may be installed
|
|
A5597-67007
|
HP
|
SCSI `Y` cable - Has 68-pin (M) high density connector in the middle and a 68-pin (F) high density connector at each end - 1.7m (5.6ft) long - From MPC card to library bulkhead
|
|
A5597-67018
|
HP
|
Functional microcode software (Version 1.10.00) - On 3.5-inch floppy disk
|
|
A5597-67019
|
HP
|
A5597-67019
|
|
A5597-67020
|
HP
|
L700 DLT 8000 FUP - Drive firmware update tape
|
|
A5597-67021
|
HP
|
Key for library front door
|
|
A5597-67024
|
HP
|
Power cable assembly - Has connectors labled P2A, P2B, P570, and P571 - 0.4m (1.3ft) long - From standard and optional DC power supply cards (MPF) to J570 and J571 on the MPC card
|
|
A5597-67027
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 0.5m (1.6ft)
|
|
A5597-67028
|
HP
|
SCSI jumper cable - 6.4cm (2.5in) long - From DLT drive enclosure to DLT drive
|
|
A5597-67030
|
HP
|
Cable assembly - Has connectors marked P551, P551A, and P551B - 28.6cm (11.3in) long - DC fan cable assembly - From connector J551 on MPC card to electronic module fan tray assembly and to drive bay exhaust fan power cable
|
|
A5597-67033
|
HP
|
Retainer (cartridge guide) used to hold a six-cell tape cartridge magazine in place
|
|
A5597-67034
|
HP
|
Personality key cable assembly - Has a DB-9 (F) connector and another connector marked P550 - 15.7cm (6.2in) long - Attached to connector J550 on the MPC card
|
|
A5597-69009
|
HP
|
DC power supply (MPF) assembly for the library - Supplies +5V, -15V, +15V, +24V, and +43V - One or two are used
|
|
A5597-69015
|
HP
|
MPV expansion card - Installed in the compact peripheral component interconnect (CPCI) card cage
|
|
A5597-69112
|
HP
|
Library controller (MPC) card - Controls robotics and executes host commands for all library operations
|
|
A5599-67004
|
HP
|
Enclosure connector and cable assembly - Includes enclosure connector, AC power wires with spade (F) connectors, a ground wire, a 5-pin (F) connector, and 0.6m (2.0ft) cable with a 22-pin (F) connector - Installed on DLT drive enclosure
|
|
A5599-67007
|
HP
|
Drive power cable assembly - Includes a 7-pin (F) connector marked P3, a 4-pin (F) connector marked P2, and a 2-pin (F) connector marked P4 - 14.4cm (5.7in) long - From drive power supply to DLT or LTO drive
|
|
A5606-67004
|
HP
|
9840 drive power cable assembly - Includes a 24-pin (F) connector marked P2 and a 24-pin (F) connector marked P53 - 16.2cm (6.4in) long - From power supply to drive
|
|
A5606-67005
|
HP
|
9840 drive tape transport interface (TTI) cable assembly - Has a DB-25 (M) connector marked P40, a 4 pin (F) connector marked EP1, and a 4 pin (M) connector marked TTI - 0.6m (1.8ft) long
|
|
A5606-67007
|
HP
|
SCSI `Y` cable kit for 9840 drive - Includes 68-pin (M) high density SCSI terminator with thumbscrews, 4 screws to mount SCSI connectors, and a SCSI `Y` cable with connectors marked J1, J2, and J3
|
|
A5617-67002
|
HP
|
Z flex cable assembly - Has two connectors marked P193A/B and two connectors marked P194A/B - 1.6m (5.3ft) long - From vertical transport (Z column) to tape cartridge picker (hand)
|
|
A5617-67006
|
HP
|
Cable assembly - Has connectors marked C, CT, M, and P53 - 2.5m (8.1ft) long - From MPC board to cartridge access port (CAP) and door interlock syste
|
|
A5617-67026
|
HP
|
Ribbon cable assembly - Has connectors marked P28 and P240 - 2.5m (8.4ft) long - From connector J28 on the MPC board to operator panel (MPO) card
|
|
A5618-67002
|
HP
|
L700 DLT 7000 FUP - Drive firmware update tape
|
|
A6304A
|
HP
|
Power distribution unit (PDU) and cable kit - Includes PDU which can power up to ten bridges and 5.0m SCSI cable for connection to tape library robotics - For 100-240V - Used for the A4688A or A4689A FC Bridge
|
|
A6324-69001
|
HP
|
High Voltage Differential SCSI (HVDS) to Low Voltage Differential SCSI (LVDS) converter PC board - Connects the HVDS robotics in the tape library to an LVDS bus - (Part of A6324A)
|
|
A6324A
|
HP
|
High voltage differential SCSI (HVDS) to low voltage differential SCSI (LVDS) converter PC board kit - Connects HVDS robotics in tape library to an LVDS bus - Includes converter, card cage assembly, cover, cable, and terminator
|
|
A6324AR
|
HP
|
High voltage differential SCSI (HVDS) to low voltage differential SCSI (LVDS) converter PC board kit - Connects HVDS robotics in tape library to an LVDS bus - Includes converter, card cage assembly, cover, cable, and terminator
|
|
A6327A
|
HP
|
Secondary DC power supply (MPF) for 10/180 library - Supplies +5V, -15V, +15V, +24V, and +43V
|
|
A6327AR
|
HP
|
Secondary DC power supply (MPF) for 10/180 library - Supplies +5V, -15V, +15V, +24V, and +43V
|
|
A6356A
|
HP
|
SureStore Fiber Channel Interface Upgrade Cabinet - Holds up to ten A4673A Fiber-to-HVDS or A4674A Fiber-to-LVDS cards - Cards must be purchased separately - Installed only in accessory bay of SureStore Tape Library 10/180 or 20/700
|
|
A6356AR
|
HP
|
SureStore Fiber Channel Interface Upgrade Cabinet - Holds up to ten A4673A Fiber-to-HVDS or A4674A Fiber-to-LVDS cards - Cards must be purchased separately - Installed only in accessory bay of SureStore Tape Library 10/180 or 20/700
|
|
A6523A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 0.5m (1.6ft) long
|
|
A6525A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 1.5m (4.9ft) long
|
|
A6527A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 5.0m (16ft) long
|
|
A6531A
|
HP
|
Low voltage differential/single-ended SCSI terminator - Has 68 pin high density (M) connector with thumbscrews
|
|
C2361A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 90 Ohms - 1.0m (3.3ft) long
|
|
C2361B
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 128 Ohms - 1.0m (3.3ft) long
|
|
C2362A
|
HP
|
Low voltage differential SCSI (LVDS) interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 90 Ohms - 2.5m (8.2ft) long
|
|
C2362B
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M) - 128 Ohms - 2.5m (8.2ft) long
|
|
C2363A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 90 Ohms - 10.0m (33ft) long
|
|
C2363B
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 128 Ohms - 10.0m (33ft) long
|
|
C2364A
|
HP
|
Low voltage differential/single-ended SCSI terminator - Has 68-pin high density (M) connector with thumbscrews
|
|
C2365A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 90 Ohms - 5.0m (16ft) long
|
|
C2365B
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 128 Ohms - 5.0m (16ft) long
|
|
C2370A
|
HP
|
Low Voltage Differential (LVD)/Single-ended (SE) SCSI terminator - Has 68 pin very high density connector with thumbscrews
|
|
C2905A
|
HP
|
High voltage differential SCSI terminator - Has 68 pin high density (M) connector with thumbscrews
|
|
C2906A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 68 pin high density (M) - 2.0m (6.6ft) long
|
|
C2907A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 50 pin high density (M) - 5.0m (16ft) long
|
|
C2911B
|
HP
|
Low voltage differential SCSI (LVDS) interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 90 Ohms - 1.0m (3.3ft) long
|
|
C2911C
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 1.0m (3.3ft) long
|
|
C2924A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long
|
|
C2924C
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 128 Ohms - 2.5m (8.2ft) long
|
|
C2925A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 10m (33ft) long
|
|
C2926A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 20.0m (66ft) long
|
|
C2961A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 68 pin high density (M) - 1.0m (3.3ft) long
|
|
C2962A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 68 pin high density (M) - 1.5m (4.9ft) long
|
|
C2972A
|
HP
|
Ultra wide single-ended SCSI-2 active terminator - Has 68 pin high density (M) connector with thumbscrews
|
|
C2978B
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 128 Ohms - 0.5m (1.6ft) long
|
|
C2979B
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 1.5m (4.9ft) long
|
|
C6511A
|
HP
|
Single-ended SCSI active terminator - Has 68 pin high density (M) connector with thumbscrews
|
|
C7521A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 5.0m (16ft) long
|
|
C7522A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 10.0m (33ft) long
|
|
C7522AR
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 10.0m (33ft) long
|
|
C7532A
|
HP
|
SCSI interface cable with thumbscrews on both ends - Has 68 pin high density (M) connectors - 20.0m (65.6ft) long
|
|
C7554A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - Includes inline terminator for use with HP V-Class computers - 5.0m (16ft) long
|
|
C7555A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - Includes inline terminator for use with HP V-Class computers - 10.0m (33ft) long
|
|
Q2001A
|
HP
|
HP LTO-1 Ultrium Bar Code Labels (100 pack)
|
|
Q2004A
|
HP
|
DLTtape IV bar code labels - Package of 100 data cartridge labels and 10 cleaning labels
|
|
STK-3036880XX
|
HP
|
Power supply for the HP9840 drive - Supplies +5VDC and +12VDC - 50 watts - Mounts inside the back of the drive enclosure
|
|
STK-309172301
|
HP
|
DLT leader repair kit for DLT 4000, DLT 7000, and DLT 8000 - Only trained CEs should use this kit
|
|
STK-3098459XX
|
HP
|
Operator panel and LCD assembly - Includes keypad, LCD display assembly, and MPO PC board
|
|
STK-3098466XX
|
HP
|
AC power distribution unit (PDU) - Includes a circuit breaker which functions as a main power switch - One or two used
|
|
STK-313619603
|
HP
|
LTO enclosure connector and cable assembly - Includes enclosure connector, AC power wires with spade (F) connectors, a ground wire, a 5 pin (F) connector, and 31cm (12.2 inches) cable with 9 pin (F) connector
|
|
STK-3136668XX
|
HP
|
Shielded SCSI `Y` cable - Includes module with 68-pin (M) high density connector and thumbscrews along with two 0.2m (0.8ft) long SCSI cables with 68-pin (F) high density connectors - For LVDS LTO drives only
|