| 配件信息 |
| FC号 | PN号 | 品牌 | 描述 |
| 磁带 |
|
|
199704-001
|
HP
|
DLT cleaning cartridge - Not for DLT 1 or DLT VS
|
|
|
217861-B21
|
HP
|
DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 21 tapes
|
|
|
217862-B22
|
HP
|
DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 315 tapes
|
|
|
295192-B21
|
HP
|
DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of seven tapes
|
|
|
295194-B21
|
HP
|
DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives
|
|
|
9164-0723
|
HP
|
DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives
|
|
|
C5141-60010
|
HP
|
DLT type IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives
|
|
|
C5141A
|
HP
|
DLTtape IIIXT tape cartridge - 15GB native capacity RoHS: Modified
|
|
|
C5141FL
|
HP
|
DLTtape IV pre-labeled tape cartridges - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code labels - Package of 20 pre-labeled tapes
|
|
|
C5141L
|
HP
|
DLTtape IV pre-labeled tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code label
|
|
|
C5142-60010
|
HP
|
DLT cleaning cartridge - Not for DLT 1 or DLT VS -
|
| 磁带驱动器 |
|
|
C5150-60047
|
HP
|
DLT drive metal enclosure - Encases the DLT tape drive
|
|
|
C5170-69202
|
HP
|
DLT 4000 Fast Wide SCSI tape drive assembly - Includes drive, enclosure, and cooling fan
|
|
|
C5172-69102
|
HP
|
DLT 7000 Fast Wide SCSI tape drive assembly - Includes drive, enclosure, and cooling fan
|
| 其它 |
|
|
1250-2548
|
HP
|
Active Single-Ended SCSI terminator - Has 50 pin high density connector with thumbscrews
|
|
|
3160-1076
|
HP
|
Fan grille - For DLT drive cooling fan
|
|
|
413290-001
|
HP
|
SCSI interface cable with thumbscrews on ends - 68 pin high density (M) to 68 pin high density (M) - 0.5m (1.6ft) long
|
|
|
413292-001
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long -
|
|
|
413293-001
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 128 ohms - 5.0m (16ft) long -
|
|
|
5012-8332
|
HP
|
SCSI interface cable with thumbscrews on both ends - 50-pin high density (M) to 68-pin high density (M) - 2.0m (6.6ft) long -
|
|
|
5012-8342
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 10.0m (33ft) long -
|
|
|
5029-0024-05
|
HP
|
SCSI interface kit - Includes SCSI-2 PCI interface board, 1.8m (6ft) 50 pin (M) high density SCSI interface cable, and SCSI drivers on CD-ROM - For Windows 95/98/ME/2000/NT 4.0/XP and Macintosh OS 9.1 - 9.22 (Not Supported for Mac OS X)
|
|
|
5181-7705
|
HP
|
SCSI interface cable with thumbscrews on both ends - 50-pin high density (M) to 68-pin high density (M) - 1.0m (3.3ft) long - (C2961A)
|
|
|
5181-7708
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 50-pin high density (M) - 5.0m (16ft) long - (C2907A)
|
|
|
5183-2682
|
HP
|
SCSI interface cable with thumbscrews on both ends - Has 68-pin high density (M) connectors - 20.0m (65.6ft) long - (C7532A)
|
|
|
A4801-63002
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) with inline termination - 10.0m (33ft) long - (A3401A Option 851, C7555A)
|
|
|
A4801-63004
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) with inline termination - 5.0m (16ft) long - (A3401A Option 875, C7554A)
|
|
|
A4842A
|
HP
|
DLT 4000 Fast/Wide Drive Upgrade Kit - Upgrades models A4851A with a single DLT 4000 by adding another DLT 4000 drive - Includes drive, drive tray, and mounting hardware
|
|
|
A4843A
|
HP
|
DLT 7000 drive conversion kit - Upgrades any model A4851A that contains DLT 4000 or DLT 7000 drive (s) - Must remove any DLT 4000 drive during the upgrade
|
|
|
C1160-60039
|
HP
|
Vertical encoder mount - Includes the spring
|
|
|
C1160-60046
|
HP
|
Capture roller assembly - Includes translate rope keeper and rope tensioner spring
|
|
|
C1192-60038
|
HP
|
Translate encoder strip
|
|
|
C1192-60040
|
HP
|
Translate frame assembly - Carriage/Picker assembly attaches to this frame - Includes mount guide/sliders
|
|
|
C1192-60042
|
HP
|
Translate frame mount guide/slider
|
|
|
C1192-60043
|
HP
|
Picker translate (horizontal) umbilical cable
|
|
|
C1700-60030
|
HP
|
Optical sensor with cable - Front door open sensor cable - Attaches to front bezel
|
|
|
C2904A
|
HP
|
Single-ended SCSI-2 active terminator - Has 50 pin high density (M) connector with thumbscrews
|
|
|
C2906A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 68 pin high density (M) - 2.0m (6.6ft) long
|
|
|
C2907A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 50 pin high density (M) - 5.0m (16ft) long
|
|
|
C2924A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long
|
|
|
C2924C
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 128 Ohms - 2.5m (8.2ft) long
|
|
|
C2925A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 10m (33ft) long
|
|
|
C2926A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 20.0m (66ft) long
|
|
|
C2961A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 68 pin high density (M) - 1.0m (3.3ft) long
|
|
|
C2962A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 68 pin high density (M) - 1.5m (4.9ft) long
|
|
|
C2972A
|
HP
|
Ultra wide single-ended SCSI-2 active terminator - Has 68 pin high density (M) connector with thumbscrews
|
|
|
C2978B
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 128 Ohms - 0.5m (1.6ft) long
|
|
|
C5148F
|
HP
|
5 slot removable DLT magazine pre-loaded with 5 DLTape IV tape cartridges
|
|
|
C5148FR
|
HP
|
5 slot removable DLT magazine pre-loaded with 5 DLTape IV tape cartridges
|
|
|
C5149F
|
HP
|
Empty 5 slot removable DLT magazine
|
|
|
C5150-00606
|
HP
|
DLT drive RFI shield
|
|
|
C5150-00609
|
HP
|
Lower pulley cover panel
|
|
|
C5150-00610
|
HP
|
Upper pulley cover panel
|
|
|
C5150-20601
|
HP
|
Vertical SCSI cable shield - Protects SCSI cable from the moving translate frame and picker assembly
|
|
|
C5150-40603
|
HP
|
SCSI cable shield - Mounts horizontally under the controller board
|
|
|
C5150-41203
|
HP
|
Lower vertical encoder strip mount
|
|
|
C5150-41211
|
HP
|
Door support strap
|
|
|
C5150-60012
|
HP
|
Bar code reader assembly
|
|
|
C5150-60023
|
HP
|
Vertical drive assembly - Controls the vertical motion for the translate frame - Includes motor, belt and channel mount
|
|
|
C5150-60024
|
HP
|
Tape cartridge guide
|
|
|
C5150-60025
|
HP
|
Idler pulley kit - Includes one pulley
|
|
|
C5150-60026
|
HP
|
Tape cartridge removable magazine assembly - 5 slot
|
|
|
C5150-60027
|
HP
|
Cartridge picker assembly with motors - Cartridge holding mechanism - Transports cartridges between the storage slots and the DLT drives - Includes the translate rope
|
|
|
C5150-60030
|
HP
|
Vertical encoder strip - Located in front right corner of the picker elevator area
|
|
|
C5150-60032
|
HP
|
Autoranging power supply - Supplies +5VDC and +12VDC - 200 watts
|
|
|
C5150-60034
|
HP
|
Braided cable with plastic coating - Has a bead at one end and a ring terminal at the other end - 1.7m (5.6ft) long - Slave rope
|
|
|
C5150-60035
|
HP
|
Braided cable - Has a bead at both ends - 43.2cm (17in) long - Horizontal translate rope
|
|
|
C5150-60037
|
HP
|
Tensioner assembly - Puts tension on the slave rope
|
|
|
C5150-60041
|
HP
|
Ribbon cable - Has two 40-pin (F) connectors - 32.1cm (12.6in) long - From picker assembly to controller board
|
|
|
C5150-60044
|
HP
|
Front access door interlock solenoid assembly
|
|
|
C5150-60048
|
HP
|
Tubeaxial fan - Mounts on the inside the back of the chassis assembly
|
|
|
C5150-60049
|
HP
|
Tape cartridge magazine guide assembly - Includes magazine sensor cable
|
|
|
C5150-60050
|
HP
|
Cable assembly - 5-pin (M) connector to 5-pin (F) connector - 32.4cm (12.8in) long - Front bezel interlock cable
|
|
|
C5150-60051
|
HP
|
Tape cartridge removable magazine sensor cable
|
|
|
C5150-60052
|
HP
|
Power cable - 6-pin (F) connector to both a 26.4cm (10.4in) cable with a 4-pin (F) connector and a 37.6cm (14.8in) cable with an 11-pin (F) connector - From 24V power module to controller board
|
|
|
C5150-60055
|
HP
|
Internal AC power cord - C13 (F) connector to 3-pin (F) connector - 64cm (25.2in) long - From AC wiring board in the 24V module to the 5/12V supply
|
|
|
C5150-60057
|
HP
|
Sensor cable assembly - Has a 14-pin (F) connector, two LED assemblies attached to plastic mounting hardware, and one optical sensor - 68.6cm (27in) long - Vertical path clear sensor cable
|
|
|
C5150-60058
|
HP
|
Ribbon cable - Has 10-pin (F) connectors - 14cm (5.5in) long - Bar code reader patch cable
|
|
|
C5150-60061
|
HP
|
Cable assembly - 10-pin (F) connector to both a 43.7cm (17.2in) cable with a 4-pin (F) connector and a 46.4cm (18.3in) cable with a 2-pin (M) connector - Library controller board cable
|
|
|
C5150-60062
|
HP
|
Ribbon cable - 24-pin (F) connector on one end - 14-pin (F) and 10-pin (M) connectors on the other end - 0.4m (1.2ft) long - Drive 1 (left) drive interface cable
|
|
|
C5150-60063
|
HP
|
Ribbon cable - 24-pin (F) connector on one end - 14-pin (F) and 10-pin (M) connectors on the other end - 0.3m (1.0ft) long - Drive 2 (right) drive interface cable
|
|
|
C5150-60065
|
HP
|
Ribbon cable - 26-pin (F) connector to 24-pin (F) connector - 1.1m (3.6ft) long - For control panel
|
|
|
C5150-60072
|
HP
|
Library controller board cover
|
|
|
C5150-60073
|
HP
|
Picker access cover panel - Mounts on side of chassis
|
|
|
C5150-60074
|
HP
|
Magazine access cover panel - Mounts on side of chassis
|
|
|
C5150-60075
|
HP
|
Top access panel without window
|
|
|
C5150-60076
|
HP
|
24V power module cover panel
|
|
|
C5150-60077
|
HP
|
Installation handles - Includes screws
|
|
|
C5150-60079
|
HP
|
Rackmount slide kit - For mounting in a standard 19-inch rack
|
|
|
C5150-60080
|
HP
|
Power switch and cable
|
|
|
C5150-60081
|
HP
|
Front bezel assembly (standard color) - Includes the front bezel, door lock mechanism, and front door open sensor cable
|
|
|
C5150-60082
|
HP
|
Front door lock mechanism - Includes lock, two keys, and pawl - Mounts on front bezel door
|
|
|
C5150-60085
|
HP
|
Top access panel with window
|
|
|
C5150-60154
|
HP
|
Drive and drive cooling fan power cable - One 8-pin (F) connector, one 4-pin (F) connector, one 4-pin (M) connector, ans one 2-pin (M) connector - 55.9cm (22in) long
|
|
|
C5150-60222
|
HP
|
Control panel/display assembly - Includes mounting channel, display board, power switch, key pad and cover, and front door lock solenoid
|
|
|
C5150-60233
|
HP
|
24V power supply module assembly - Includes 24V power supply and cable
|
|
|
C5156-67943
|
HP
|
Standalone DLT library enclosure kit - Includes top and side cosmetic panels, feet and instructions (Parchment White)
|
|
|
C5157F
|
HP
|
Rack mount kit for HP SureStore DLT library - Includes rack slides and hardware - For mounting in a standard 19-in rack
|
|
|
C5170-60015
|
HP
|
Adaptec 2940 Ultra Wide SCSI host adapter
|
|
|
C5170-60048
|
HP
|
Drive cooling fan assembly - Mounts on the inside of the back of the drive enclosure
|
|
|
C5170-60066
|
HP
|
Universal asynchronus receiver/transmitter (UART) cable
|
|
|
C5170-60067
|
HP
|
SCSI interface cable with thumbscrews on both ends - High density 68-pin (M) to high density 68-pin (M) - 27cm (10.6-in) long - Wide-to-Narrow converter cable
|
|
|
C5170-60070
|
HP
|
External SCSI daisy chain cable
|
|
|
C5170-60071
|
HP
|
SCSI cable kit for two drives - Installation instructions, adhesive strip, and two terminated cables - One 1.3m (4.4ft) cable with a 68 pin (M) and a 68 pin (F) connector - One 1.1m (3.7ft) cable with a 68 pin (M) connector and two 68 pin (F) connectors
|
|
|
C5170-69008
|
HP
|
Fast Wide SCSI interface board - Mounts in the back right corner
|
|
|
C5170-69101
|
HP
|
System library controller board
|
|
|
C5173-60081
|
HP
|
Front bezel assembly (Parchment White with HP logo) - Includes the front bezel, door lock mechanism, and front door open sensor cable
|
|
|
C5699A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long
|
|
|
C6511A
|
HP
|
Single-ended SCSI active terminator - Has 68 pin high density (M) connector with thumbscrews
|
|
|
C7521A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 5.0m (16ft) long
|
|
|
C7522A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 10.0m (33ft) long
|
|
|
C7522AR
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 10.0m (33ft) long
|
|
|
C7532A
|
HP
|
SCSI interface cable with thumbscrews on both ends - Has 68 pin high density (M) connectors - 20.0m (65.6ft) long
|
|
|
C7554A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - Includes inline terminator for use with HP V-Class computers - 5.0m (16ft) long
|
|
|
C7555A
|
HP
|
SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - Includes inline terminator for use with HP V-Class computers - 10.0m (33ft) long
|
|
|
Q2004A
|
HP
|
DLTtape IV bar code labels - Package of 100 data cartridge labels and 10 cleaning labels
|
京公网安备 11010802036102号