配件信息 |
FC号 | PN号 | 品牌 | 描述 |
CPU |
|
A3639-69012
|
HP
|
PA-RISC 8500/8600 processor support module - Provides power for two processors - One required for every two processors
|
|
A4883-69101
|
HP
|
HP PA-RISC 8500 processor - 360MHz with 1.5MB cache - Includes attached heat sink
|
|
A4883A
|
HP
|
HP PA-RISC processor upgrade kit - Includes one 360MHz PA-RISC 8500 processor with 1.5MB cache and attached heat sink
|
|
A5500-69101
|
HP
|
HP PA-RISC 8500 processor - 440MHz with 1.5MB cache - Includes attached heat sink
|
|
A5500A
|
HP
|
HP PA-RISC processor upgrade kit - Includes one 440MHz PA-RISC 8500 processor with 1.5MB cache and attached heat sink
|
|
A5866-69001
|
HP
|
HP PA-RISC 8600 processor - 550MHz with 1.5MB cache - Includes attached heat sink
|
|
A5866A
|
HP
|
HP PA-RISC processor upgrade kit - Includes one processor 550MHz PA-RISC 8600 with 1.5MB cache and attached heat sink
|
RAID卡 |
|
A5856A
|
HP
|
NetRAID-4si four channel Ultra2 SCSI disk array controller - PCI board with two internal 68 Pin high density and four external 68 pin very high density connectors
|
SCSI卡 |
|
A4800A
|
HP
|
Single port PCI fast/wide differential (FWD) SCSI-2 adapter - Has one external high density 68 pin connector and one internal high density 68 pin connector - Single port PCI FWD High Voltage Differential SCSI-2 adapter - has one external High Density 68 p
|
|
A5149A
|
HP
|
PCI Ultra2 Low Voltage Differential SCSI adapter - Has one external very high density 68 pin connector with thumbscrews and one internal high density 68 pin connector with latch/clips
|
|
A5149AR
|
HP
|
PCI Ultra2 Low Voltage Differential SCSI adapter - Has one external very high density 68 pin connector with thumbscrews and one internal high density 68 pin connector with latch/clips
|
|
A5150A
|
HP
|
Dual port PCI Ultra2 low voltage differential SCSI adapter - Has two external very high density 68 pin connectors and two internal high density 68 pin connectors
|
|
A5150AR
|
HP
|
Dual port PCI Ultra2 low voltage differential SCSI adapter - Has two external very high density 68 pin connectors and two internal high density 68 pin connectors
|
|
A5159A
|
HP
|
Dual port PCI Fast Wide High Voltage Differential SCSI-3 adapter - Has two external very high density 68-pin connectors and two internal high density 68-pin connectors - For HP-UX operating system
|
导轨 |
|
A3639-04028
|
HP
|
Rack mount outer rail, 88.9cm (35in) long
|
|
A5170A
|
HP
|
Rack mount kit - For mounting an N-class server in a 1.26M, 1.6M, or 1.96M Rack System/E cabinet
|
电池 |
|
1420-0866
|
HP
|
240V battery pack - 25A, external - For PowerTrust II-MR 4000W, 6500W, and 8000W UPS
|
|
A6586A
|
HP
|
240V Battery pack - 25A, external - For PowerTrust II-MR 4000W UPS
|
|
A6587A
|
HP
|
External battery pack kit - Includes two batteries rated at 240V, 25A each
|
电源 |
|
A2998B
|
HP
|
Powertrust Uninterruptible Power Supply (Rack Mount) - 3.0KVA, 3000 watt, 240VAC - Quartz Gray
|
|
A3589B
|
HP
|
PowerTrust Uninterruptible Power Supply (Rack Mount) - 5.5KVA, 5500 watt, 240VAC (Quartz Gray)
|
|
A3639-69217
|
HP
|
Hot-swap power supply - 200/240VAC input, 50/60Hz
|
|
A5171A
|
HP
|
Hot-swap redundant power supply - 200/240VAC input, 50/60Hz
|
|
A6583A
|
HP
|
PowerTrust II-MR Uninterruptible Power Supply - 4.5KVA, 4000 watt, 240VAC - Includes one battery pack, RS232 DB9/DB9 standard cable, rack kit, and manuals
|
|
A6584A
|
HP
|
PowerTrust II-MR Uninterruptible Power Supply - 9.0KVA, 6500 watt, 240VAC - Includes one battery pack set with 2 batteries, RS232 DB9/DB9 standard cable, rack kit, and manuals
|
|
E7674-63003/E7674-63001
|
HP
|
PDU POWER DISTR UNIT
|
风扇 |
|
A3639-04016
|
HP
|
Fan assembly - Mounts in the center of the chassis
|
|
A3639-04017
|
HP
|
Fan assembly - Mounts in the rear of the chassis
|
|
A3639-04018
|
HP
|
Fan assembly - Mounts in the front of the chassis
|
光纤卡 |
|
A5158A
|
HP
|
1Gbps Tachyon TL PCI 2x Fiber Channel (FC) adapter - Single channel, short wave - Has SC connectors
|
|
A5158AR
|
HP
|
1Gbps Tachyon TL PCI 2x Fiber Channel (FC) adapter - Single channel, short wave - Has SC connectors
|
机壳 |
|
A3639-00214
|
HP
|
Power supply bay cover with captive screws - For empty power supply bays
|
|
A3639-04010
|
HP
|
N-CLASS system chassis
|
|
A4900A
|
HP
|
Rack System/E25 cabinet - 1.25m 19in 25U rack cabinet - Has vented top, vented rear door, side cover panels, front/back anti-tip foot, castors, leveling feet
|
|
A4900AR
|
HP
|
Rack System/E25 cabinet - 1.25m 19in 25U rack cabinet - Has vented top, vented rear door, side cover panels, front/back anti-tip foot, castors, leveling feet
|
|
A4901A
|
HP
|
Rack System/E33 cabinet - 1.6m 19in 33U rack cabinet - Has vented top, vented rear door, side cover panels, front/back anti-tip foot, castors, and leveling feet
|
|
A4901AR
|
HP
|
Rack System/E33 cabinet - 1.6m 19in 33U rack cabinet - Has vented top, vented rear door, side cover panels, front/back anti-tip foot, castors, and leveling feet
|
|
A4902A
|
HP
|
Rack System/E41 cabinet - 1.95m 19in 41U rack cabinet - Has vented top, vented rear door, side cover panels, front/back anti-tip foot, castors, leveling feet
|
|
A4902AR
|
HP
|
Rack System/E41 cabinet - 1.95m 19in 41U rack cabinet - Has vented top, vented rear door, side cover panels, front/back anti-tip foot, castors, leveling feet
|
内存 |
|
A3639-00192
|
HP
|
Memory clip - Retains the memory (DIMM) module
|
|
A3639-69102
|
HP
|
Memory carrier - Has eight DIMM slots - N4000 memory carrier - Plugs into the system processor board
|
|
A3763-69201
|
HP
|
256MB ECC high-density SDRAM DIMM memory module - Must be installed in pairs of equal size (512MB kit is A3763A)
|
|
A3763A
|
HP
|
512MB ECC DIMM high-density memory upgrade kit - Includes two 256MB SDRAM DIMM modules
|
|
A4882A
|
HP
|
Memory carrier - Adds an additional eight DIMM slots - N4000 memory carrier - Attaches to the system processor board
|
|
A4923-69101
|
HP
|
512MB ECC high-density SDRAM DIMM memory module - Must be installed in pairs of equal size (1024MB kit is A4923A)
|
|
A4923A
|
HP
|
1024MB ECC DIMM high-density memory upgrade kit - Includes two 512MB SDRAM DIMM modules
|
|
A5864-69002
|
HP
|
1024MB ECC high-density SDRAM DIMM memory module - Must be installed in pairs of equal size (2048MB kit is A5864A)
|
|
A5864A
|
HP
|
2048MB ECC high-density SDRAM memory upgrade kit - Includes two 1024MB SDRAM DIMM modules
|
其它 |
|
A3639-00101
|
HP
|
Front air baffle
|
|
A3639-00102
|
HP
|
Rear air baffle
|
|
A3639-00103
|
HP
|
Center support brace - Mounts in the middle of the system board section of the chassis
|
|
A3639-00104
|
HP
|
Hot-swap hard drive tray - Metal tray for mounting 3.5-inch internal hot-swap hard disk drives
|
|
A3639-00141
|
HP
|
Top front chassis cover
|
|
A3639-00142
|
HP
|
Top back chassis cover
|
|
A3639-00149
|
HP
|
Memory expansion board guide
|
|
A3639-04013
|
HP
|
Left/right PCI I/O access cover
|
|
A3639-04023
|
HP
|
Front bezel - Covers the front of the server
|
|
A3639-04030
|
HP
|
Left side front bezel mounting bracket
|
|
A3639-04031
|
HP
|
Right side front bezel mounting bracket
|
|
A3639-40024
|
HP
|
Processor socket dust cover - Covers an empty processor socket
|
|
A3639-60018
|
HP
|
Front display panel - Has status LED`S and power switch
|
|
A3641-00014
|
HP
|
Heat sink thermal interface
|
|
A5168A
|
HP
|
N-class processor support module - One required for every two processors
|
适配卡 |
|
J3525A
|
HP
|
Dual Port PSI Card for HP 3000/9000 - Two port X.25 PCI frame relay adapter card
|
|
J3526A
|
HP
|
WAN adapter - High Performance 4-port PCI Synchronous Adapter X.25 frame relay card
|
网卡 |
|
A3738A
|
HP
|
10Base-T/100Base-TX PCI LAN adapter - Has AUI, BNC, and RJ-45 connectors - LAN Adapter - 10/100Base-TX PCI LAN adapter with one port, but with three connectors AUI, BNC, and RJ-45
|
|
A4926A
|
HP
|
LAN adapter - 1000Base-SX PCI Gigabit Ethernet LAN adapter - Supports all PCI bus configurations
|
|
A4929A
|
HP
|
LAN adapter - 1000Base-T PCI Gigabit Ethernet LAN adapter - Supports all PCI bus configurations
|
|
A5230A
|
HP
|
100Base-TX PCI LAN adapter with one RJ-45 port - LAN Adapter - 100Base-TX PCI LAN adapter with one RJ-45 port
|
|
A5506B
|
HP
|
100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) - Has four RJ-45 connectors - Require one 64-bit PCI slot - For HP-UX operating system - LAN Adapter - 4 port 100Base-TX PCI LAN adapter - Has four RJ-45 ports - Supports al
|
|
A5838A
|
HP
|
PCI 5.0v dual port 10Base-T/100Base-TX LAN and dual port Ultra2 Low Voltage Differential/Single-Ended (LVD/SE) SCSI adapter - Has two RJ-45 LAN ports and two external 68-pin very high density connectors - Dual port 10/100Base-T LAN and Dual port Ultra2 LV
|
系统板 |
|
A3639-69201
|
HP
|
Core I/O board - Has one ultra2 SCSI LVD and 10/100Base-T RJ-45 port and guardian service processor that includes 9-pin RS-232 remote and local console ports and 10Base-T LAN port - Core I/O board - Mounts horizontally in the rear of the chassis - Has one
|
|
A3639-69208
|
HP
|
Power monitor - Attaches to the system board
|
|
A3639-69314
|
HP
|
Left PCI I/O backplane board - Has six PCI slots - N4000 left PCI I/O backplane board - Has six PCI slots - Mounts vertically in the left side of chassis
|
|
A3639-69315
|
HP
|
Right PCI I/O backplane board - Has six PCI slots - N4000 right PCI I/O backplane board - Has six PCI slots - Mounts vertically in the right side of chassis
|
|
A3639-69520
|
HP
|
System board - For 1-8 way PA-RISC 8600 processor configuration - N4000 System board - For 1-8 way PA-RISC 8600 processor configuration - Mounts horizontally in the center of the chassis
|
|
A3639-69806
|
HP
|
System board - For 1-8 way PA-RISC 8500 processor configuration - N4000 System board - For 1-8 way PA-RISC 8500 processor configuration - Mounts horizontally in the center of the chassis
|
线缆 |
|
8120-3996
|
HP
|
Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in the United States and Canada)
|
|
A3639-63006
|
HP
|
Ribbon cable kit - Includes an RFI shield, a DB-15 (M) to DB-15 (F) adapter, and a 53.3cm (21in) ribbon cable with a 16-pin (F) connector on one end and a DB-15 (F) connector on the other end - Front panel wiring harness
|
|
A3639-63007
|
HP
|
Front fan wiring harness - 12-pin (F) connector to both a 22.1cm (8.7in) cable marked `Fan 0` with a 6-pin (F) connector and a 28.6cm (11.3in) cable marked `Fan 1` with a 6-pin (F) connector
|
|
A3639-63008
|
HP
|
Rear fan wiring harness - 12-pin (F) connector to both a 20.8cm (8.2in) cable with a 6-pin (F) connector and a 51.3cm (20.2in) cable with a 6-pin (F) connector
|
|
A3639-63009
|
HP
|
Center fan wiring harness
|
|
A3639-67021
|
HP
|
Internal AC wiring kit - Terminal block - Three C13 (F) to spade lug (M) adapters - Three 29cm (11.5 inches) cables with C14 (M) connector, two spade lugs (F), and ring terminal - Three 29cm (11.5 inches) cables with ring terminal and five spade lugs (F)
|
硬盘 |
|
A5505-69003
|
HP
|
9GB hot-plug Ultra SCSI Low Voltage Differential (LVD) SCA hard drive - 7,200 RPM, low profile (Seagate ST39102LC)
|
|
A5505A
|
HP
|
9GB hot-plug Ultra SCSI Low Voltage Differential (LVD) SCA hard drive - 7,200 RPM, low profile (Seagate ST39102LC)
|
|
A5505AR
|
HP
|
9GB hot-plug Ultra SCSI Low Voltage Differential (LVD) SCA hard drive - 7,200 RPM, low profile (Seagate ST39102LC)
|
|
A5531-69003
|
HP
|
18GB hot-plug Ultra SCSI Low Voltage Differential (LVD) SCA hard drive - 10,000 RPM, low profile (Seagate ST318203LC)
|
|
A5531A
|
HP
|
18GB hot-plug Ultra SCSI Low Voltage Differential (LVD) SCA hard drive - 10,000 RPM, low profile (Seagate ST318203LC)
|
|
A5531AR
|
HP
|
18GB hot-plug Ultra SCSI Low Voltage Differential (LVD) SCA hard drive - 10,000 RPM, low profile (Seagate ST318203LC)
|
|
A6089-69001
|
HP
|
36GB hot-plug Ultra-2 Low Voltage Differential (LVD) SCSI SCA hard drive - 10,000 RPM, low profile (Seagate ST336704LC)
|
|
A6089A
|
HP
|
36GB hot-plug Ultra-2 Low Voltage Differential (LVD) SCSI SCA hard drive - 10,000 RPM, low profile (Seagate ST336704LC)
|
|
A6089AR
|
HP
|
36GB hot-plug Ultra-2 Low Voltage Differential (LVD) SCSI SCA hard drive - 10,000 RPM, low profile (Seagate ST336704LC)
|
硬盘背板 |
|
A3639-69113
|
HP
|
Disk/media backplane - Has power and SCSI connectors for removable media mass storage devices on one side and two SCA connectors for hot-plug hard drives on the other side
|